2025

• Zafarshani, F. Cilento, F. Esposito, L. Sansone, S. Campopiano, M. Zahid, A. Kumar, A. Iadicicco, M. Giordano. GNPs-Based Strain Sensors Derived from Recycled Cellulose Acetate: Fabrication and Analysis, in Proceedings of the 37th European Conference on Solid-State Transducers EUROSENSORS 2025.
• A. Vijayakumar, M. Zahid, S. G. Corvaglia, A. Maffezzoli. Skin/core fracture toughness of sandwich structures: a comparison of different experimental arrangements. Polymer Testing 2025;150:108904. https://doi.org/10.1016/j.polymertesting.2025.108904
• A. Vijayakumar, M. Zahid, A. Kumar, S. G. Corvaglia, A. Maffezzoli. Impact of Intact Length and Initial Debond on the Mode I Fracture Toughness of Sandwich Structures. Polymer Composites 2025. https://doi.org/10.1002/pc.70625
• A. Vijayakumar, M. Zahid, S. G. Corvaglia, F. Montagna, F. Lionetto, A. Maffezzoli. Characterisation of thermoplastic sandwich panels manufactured by continuous ultrasonic welding of skins to the core. Composites Part B: Engineering 2025;307:112927. https://doi.org/10.1016/j.compositesb.2025.112927
• A. Vijayakumar, M. Zahid, A. Kumar, S. G. Corvaglia, F. Montagna, F. Lionetto, M. D. Giorgi, A. Maffezzoli. Heat transfer modelling in continuous skin/core ultrasonic welding of thermoplastic sandwich structures. Composites Part A: Applied Science and Manufacturing (Under review)
• Trucillo, A. A. Vijayakumar, M. Zahid, A. Maffezzoli, E. Di Maio. Manufacturing of PP-Based Composite Sandwich Panels via Simultaneous Foaming and Skin-Core Bonding. Polymer Composites 2025;46. https://doi.org/10.1002/pc.70287
• Pappa, A. Kumar, F. Danzi, A. Campilungo, C. Annicchiarico, N. Gallo, M. Cabrioli, M. S. Colmenero, M. Vanazzi, B. Fošnarič, T. Černelič, V. Capitani, S. Pasquino, L. Margaria, F. Enes Altunok, A. Coluccia, G. De Pasquale, "Joining technologies combining CFRPs and 3D metal anchors for aeronautical structural parts: case study - vertical stabilizer", Society for the Advancement of Material and Process Engineering Conf. (SAMPE EUROPE), Amsterdam (2025).

• E. Pappa, A. Kumar, C. Annicchiarico, N. Gallo, M. Cabrioli, M. S. Colmenero, M. Vanazzi, B. Fošnarič, T. Černelič, L. Margaria, F. Enes Altunok, A. Coluccia, G. De Pasquale. "Sustainable aviation through a novel multi-material joint technology for aeronautical applications", 15th European Aerospace Science Network Int. Conf. (EASN), Madrid (2025).

• Trimini, G. Stano, S. Varetti, S. G. Corvaglia, A. Kumar, G. Percoco (2025). Atmospheric plasma enhances interlayer adhesion in high performance 3D printed polymers by modifying surface energy, morphology and chemical composition. Progress in Advanced Manufacturing.
• Varetti, L. Margaria, A. Coluccia, G. De Pasquale, A. De Zanet, E. Pappa, A. Kumar, M. Cabrioli, M. Vanazzi (2025). Fatigue characterization of AlSi10Mg alloy from variable L-PBF processing parameters addressed to hybrid joints of aerostructures. EURO PM 2025.
• Varetti, A. De Zanet, E. Pappa, C. Annicchiarico, A. Kumar, N. Gallo, M. Cabrioli, M. Vanazzi, F. E. Altunok, B. Destito, G. De Pasquale (2025). AlSi10mg additively manufactured anchors for a novel multimaterial hybrid joining for aerospace. Sampe Europe 2025.
• Cabrioli, M. S. Colmenero, M. Vanazzi, S. Varetti, A. Kumar, L. Margaria, G. De Pasquale, J. Bellver, B. Perez (2025). Upcycling AlSi10Mg scrap metal from multi-material joints through atomization and generation of aerospace-grade metal powders. EURO PM 2025.

2024

• Cumbo, D. De Gregoriis, F. Danzi, A. Kumar, F. Naets. Recursive parameter estimation for the on-line monitoring of delamination growth in composite structures. Proccedings in Structural Health Monitoring 2024.

2023

• Varetti, M. Boccaccio, V. Triminì, I. Scavo, F. Flora, F. Acerra, S. G. Corvaglia. Study on the influence of process parameters on surface properties of additively manufactured parts. Proceedings of Twenty-third international conference on composite materials (ICCM23), Belfast, Ireland, 30 July-4 August, 2023.
• De Zanet, S. Varetti, E. Pappa, C. Annicchiarico, A. Ricciardi, M. Pagone, N. Gallo, A. Kumar, G. De Pasquale. Novel multimaterial hybrid joining process for CFRP-metal structures in aviation industry. ICSAAM 2023, The 10th International Conference on Structural Analysis of Advanced Materials, 10 - 14 September 2023, Island of Zante (Zakynthos), Greece.
• Triminì, S. Varetti, G. Percoco, S. G. Corvaglia, I. Scavo, N. Gallo. Compressive strength behavior of gyroid lattice structure in 3D-printed CF-PEEK. ICSAAM 2023, The 10th International Conference on Structural Analysis of Advanced Materials, 10 - 14 September 2023, Island of Zante (Zakynthos), Greece.
• Triminì, S. Varetti, G. Percoco, S. G. Corvaglia, N. Gallo, I. Scavo (2023). Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances. In: Lopresto, V., Papa, I., Langella, A. (eds) Dynamic Response and Failure of Composite Materials. DRAF 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-28547-9_21
• Varetti, N. Gallo, I. Scavo, S. G. Corvaglia, (2023). 3D Printed Carbon PEEK - Influence of Printing Strategy on Tensile Performances. In: Lopresto, V., Papa, I., Langella, A. (eds) Dynamic Response and Failure of Composite Materials. DRAF 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-28547-9_20.

• Favre, S., Di Fede, F., Brusa, E., Delprete, C., Accardo, G., Fuel-based thermal management systems for aircraft electrification: modelling and performance analysis, The Aeronautical Journal, 2026, 1–33.
• Massaro, M. C., Aluia, F., Biga, R., Accardo, G., Monteverde, A. H. A Potential of ammonia as hydrogen storage for future electrified aircraft, Energy Conversion and Management: X, 2025, 26, 101034.
• Favre, S., Di Fede, F., Brusa, E., Delprete, C. Innovative Thermal Management Systems for fuel Cell Electric Aircraft International Journal of Mechanics and control, 2025 26(1), 159-183.
• Favre, S., Brusa, E., Delprete, C., Di Fede, F., Accardo G. Fuel-based thermal management systems for aircraft electrification: modelling and performance analysis, The Aeronautical Journal in press
• Mazzoni, F., Biga, R., Manrique-Escobar, C. A., Brusa, E., & Delprete, C Design space exploration through liquid H2 tank preliminary sizing and design of experiments analysis, International Journal of Hydrogen Energy, 2024, 95, 1252-1260.
• Massaro, M. C., Biga, R., Kolisnichenko, A., Marocco, P., Monteverde, A. H. A., & Santarelli, M. Potential and technical challenges of on-board hydrogen storage technologies coupled with fuel cell systems for aircraft electrification, Journal of Power Sources, 555, (2023) 232397.

• S. Corli, et al. “Benchmarking the emulation of measurement-based quantum computing through the Max K-Cut algorithm”, accepted in Quantum Information Processing, 2025.
• F. Hoch., et al. "Quantum machine learning with Adaptive Boson Sampling via post-selection," in Nature Communications, vol. 16, no. 1, pp. 902, 2025.
• L. Mancini, et al. "Atto-Watt Photo-Detection at Mid-Infrared Wavelengths by a Room-Temperature Balanced Heterodyne Set-Up," in Laser & Photonics Reviews, pp. e01339, 2025.
• C. Pitsch, et al. "Toward video-rate quantum ghost imaging," in APL Photonics, vol. 10, no. 10, pp. 100801, 2025.
• A. Suprano, et al., "Quantum Ghost Imaging of remote targets with novel SPAD technology," in Conference on Lasers and Electro-Optics/Europe (CLEO/Europe 2025) and European Quantum Electronics Conference (EQEC 2025), 2025.
• M. Vischi, et al. "Simulating photonic devices with noisy optical elements," in Phys. Rev. Res., vol. 6, pp. 033337, 2024.
• F. Levi, et al., "Improving twin-field QKD with optical clock technologies," in CLEO 2024, 2024.
• G. Bertaina, et al. "Phase Noise in Real-World Twin-Field Quantum Key Distribution," in Advanced Quantum Technologies, vol. 7, no. 6, pp. 2400032, 2024.
• S. Corli, et al, "A Max K-Cut Implementation for QAOA in the Measurement Based Quantum Computing Formalism," in 2023 IEEE International Conference on Quantum Computing and Engineering (QCE), 2023, pp. 284-285.
• M. Proietti, F. Cerocchi, M. Dispenza. "Native measurement-based quantum approximate optimization algorithm applied to the Max $K$-Cut problem," in Phys. Rev. A, vol. 106, pp. 022437, 2022.

• Vandelli, A. Lignarolo, C. Cavazzoni, D. Dragoni, "Evaluating the practicality of quantum optimization algorithms for prototypical industrial applications", Quantum Inf. Process. 23 (10), 344 (2024)
• Rocutto, M. Maronese, D. Dragoni, A. Cavalli, C. Cavazzoni, "Comparing Adiabatic Quantum Computers for satellite images feature extraction", Future Gener. Comput. Syst. 159, 105-113 (2024)
• Corli, D. Dragoni, M. Proietti, M. Dispenza, C. Cavazzoni, E. Prati, "Benchmarking the emulation of measurement-based quantum computing through the Max K-Cut algorithm", Quantum Inf. Process. 24, 396 (2025)
• Corli, L. Moro, D. Dragoni, M. Dispenza, E. Prati, "Quantum machine learning algorithms for anomaly detection: A review", Future Gener. Comput. Syst. 166, 107632 (2025)
• Turro, A. Lignarolo, D. Dragoni, "Toward Practical Application of the Quantum Carleman Lattice Boltzmann Method in Industrial CFD Simulations", IEEE Trans. Quantum Eng. 6, 1-18 (2025)
• Vandelli, F. Ferrari, D. Dragoni, "Constraint-preserving quantum algorithm for the multi-frequency antenna placement problem", arXiv:2511.15566 (2025)
• Vandelli, F. Ferrari, D. Dragoni, "Parallel splitting method for large-scale quadratic programs", J. Heuristics 32, 32 (2026)
• Tarquini, D. Dragoni, M. Vandelli, F. Tudisco, "Testing quantum and simulated annealers on the drone delivery packing problem", Quantum Mach. Intell. 8 (1), 14 (2026)
• M. Maronese, F. Ferrari, M. Vandelli, D. Dragoni, "High-expressibility quantum neural networks using only classical resources", Quantum Mach. Intell. 8 (1), 25 (2026)
• Tarquini, M. Vandelli, F. Ferrari, D. Dragoni, F. Tudisco, "Drone Delivery Packing Problem on a Neutral‐Atom Quantum Computer", Adv. Quantum Technol. 9 (9) (2026)
• Tarquini, M. Vandelli, F. Ferrari, D. Dragoni, F. Tudisco, "Emergency hub placement with a neutral-atom quantum computer", arXiv:2606.19589 (2026)
• Ferrari, M. Vandelli, D. Dragoni, "Feasibility-driven QAOA with penalty scheduling", arXiv:2606.25117 (2026)
• Turro, D. Dragoni, "A Resource-Efficient Quantum Framework for Graph Coloring and Chromatic Number Estimation", arXiv:2608.08694 (2026)
• Turro, M. Maronese, D. Dragoni, "Quantum Computing for Industrial Electromagnetics: Applicability and Case Studies in Solving Maxwell's Equations", arXiv:2608.10671 (2026)
• Vandelli, D. Dragoni, "Combinatorial optimization of connected UAV communication bridges for emergency response", arXiv:2609.02562 (2026)

• Monguzzi, Andrea, et al. “Reactive Whole-Body Control of Mobile Manipulators for Dynamic Target Tracking via Adaptive-Predictive Visual Servoing.” 2026 IEEE International Conference on Robotics & Automation (ICRA), IEEE 2026.
• Rollo, Federico, et al. “A Ground Aware LiDAR Intensity Filter for Reliable SLAM in Challenging Reflection Environments”, The Twenty Second International Conference on Autonomic and Autonomous Systems (ICAS 2026), IEEE 2026.
• Bozano, Giacomo, et al. "Optimal Nonlinear Series Elastic Actuators for Efficient SLIP Running." Design Tools and Methods in Industrial Engineering V: Proceedings of the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, Volume 2. Vol. 2. Springer Nature, 2026.
• Monguzzi, Andrea, et al. “Inverse Kinematics for Path-Tracking of Robots with External Axes”, proceedings of the IAS 19 - International Conference on Intelligent Autonomous Systems, 2025.
• Testa, Andrea, et al. "A stable method for task priority adaptation in quadratic programming via reinforcement learning." Robotics and Computer-Integrated Manufacturing 91 (2025): 102857.
• Rollo, Federico, et al. "Personalized Re-identification through Unsupervised Continual Learning and Parallel Training." 2025 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, 2025.
• Pericu, Valentina, et al. “A Scalable Robot-Agnostic Voice Control Framework for Multi-Robot Systems.” Proceedings of the 22nd International Conference on Informatics in Control, Automation and Robotics (ICINCO 2025)- Volume 2, pages 194-201. SciTePress, 2025.
• Bozano, Giacomo, et al. "Optimal Nonlinear Series Elastic Actuators for Efficient SLIP Running." Design Tools and Methods in Industrial Engineering V: Proceedings of the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, September 3–5, 2025, Genova, Italy, Volume 2. Vol. 2. Springer Nature, 2026.
• Rollo, Federico, et al. "LEO-SLAM: A Multi-Level Scan Matching Approach with Submap-based Loop Closure Detection." 2025 European Conference on Mobile Robots (ECMR). IEEE, 2025.
• Testa, Andrea, et al. "A stable method for task priority adaptation in quadratic programming via reinforcement learning." Robotics and Computer-Integrated Manufacturing 91 (2025): 102857.
• Del Bianco, Edoardo, et al. "Smart Drill: An Autonomous Drilling End-Effector with Embedded Sensing and Intelligence for Mobile and Collaborative Robots." 2024 IEEE 20th International Conference on Automation Science and Engineering (CASE). IEEE, 2024.
• Rollo, Federico, et al. "Continuous adaptation in person re-identification for robotic assistance." 2024 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2024.
• Del Bianco, Edoardo, et al. "A high-force gripper with embedded multimodal sensing for powerful and perception driven grasping." 2024 IEEE-RAS 23rd International Conference on Humanoid Robots (Humanoids). IEEE, 2024.
• Rollo, Federico, et al. "Semantic-based loco-manipulation for human-robot collaboration in industrial environments." European Robotics Forum. Cham: Springer Nature Switzerland, 2024.
• Del Bianco, Edoardo, et al. "Mechanical design of an agile quadruped robot." European Robotics Forum. Cham: Springer Nature Switzerland, 2024.
• Rollo, Federico, et al. "Artifacts mapping: Multi-modal semantic mapping for object detection and 3d localization." 2023 European Conference on Mobile Robots (ECMR). IEEE, 2023.
• Testa, Andrea, et al. "Joint position bounds in resolved-acceleration control: a comparison." International Workshop on Human-Friendly Robotics. Cham: Springer Nature Switzerland, 2023.
• Rollo, Federico, et al. "Followme: a robust person following framework based on visual re-identification and gestures." 2023 IEEE International Conference on Advanced Robotics and Its Social Impacts (ARSO). IEEE, 2023.
• Amadio, Fabio, et al. "Target-referred DMPs for learning bimanual tasks from shared-autonomy telemanipulation." 2022 IEEE-RAS 21st International Conference on Humanoid Robots (Humanoids). IEEE, 2022.
• Laghi, Marco, et al. "A target-guided telemanipulation architecture for assisted grasping." IEEE Robotics and Automation Letters 7.4 (2022): 8759-8766.

• Mancini, L., Ulpiani, P., Vecchi, C., Daga, L., Proietti, M., Liorni, C., ... & Palaferri, D. (2025). Atto‐Watt Photo‐Detection at Mid‐Infrared Wavelengths by a Room‐Temperature Balanced Heterodyne Set‐Up. Laser & Photonics Reviews, e01339.
• Sansone, L., Loffredo, F., Cilento, F., Miscioscia, R., Martone, A., Barrella, N., ... & Giordano, M. (2024). Recent Advances in Graphene Adaptive Thermal Camouflage Devices. Nanomaterials, 14(17), 1394.